PETG Plastic Shapes and Sizes:
- PETG Sheet
- PETG Rods
- PETG Bar
|
PETG Machining (available though our plastic manufacturing division)
| PETG Properties |
| Water Absorption (24hrs) |
(%) |
D-570 |
0.2 |
| Density |
(lb/in³) |
D-792 |
|
| (g/cm³) |
|
| IZOD Notched Impact |
(ft-lb/in) |
D-256 |
1.2 |
| Tensile Strength |
(psi) |
D-638 |
7,700 |
| Tensile Modulus |
(psi) |
D-638 |
320,000 |
| Tensile Elongation at Break |
(%) |
D-638 |
- |
| Hardness |
(Rockwell R) |
D-785 |
R115 |
| Compressive Strength |
(psi) |
D-695 |
8,000 |
| Compressive Modulus |
(psi) |
D-695 |
- |
| Flexural Strength |
(psi) |
D-790 |
11,200 |
| Flexural Modulus |
(psi) |
D-790 |
310,000 |
| Thermal Conductivity |
(BTU-in/ft²-hr-°F) |
C-177 |
- |
| (x 104 cal/cm-sec-°C) |
- |
| Heat Deflection Temp at 264 psi |
(°F / °C) |
D-648 |
157 / 69 |
| Coefficient of Linear Thermal Expansion |
(x 10-5 in./in./°F) |
D-696 |
3.8 |
| Flammability Rating |
|
UL-94 |
H-B |
| Glass Transition Temperature |
(°F / °C) |
D-3418 |
178 / 81 |
| Max Operating Temp |
(°F / °C) |
- |
- |
| DielectricStrength, 1/8" thick |
(V/mil) |
D-149 |
410 |
| DielectricConstant at 1 kHz |
|
D-150 |
2.6 |
| Dissipation Factor at 1 kHz |
|
D-150 |
- |
| Volume Resistivity at 50% RH |
(ohm-cm) |
D-257 |
- |
| Physical |
Mechanical |
Thermal |
Electrical |
|
|
- Let us be your "Just In Time Inventory."
