Distributor of Nylatron® in Sheet, Rod, and Bar Contact Us for a Quote
Nylatron Plastic Types:
|
Nylatron Plastic Shapes and Sizes:
- Nylatron Sheet
- Nylatron Rods
- Nylatron Bar
|
Nylatron Machining (available though our plastic manufacturing division)
| Nylatron MATERIAL NAME |
COLOR |
FDA |
USDA |
NSF |
|
|
|
| Nylatron® (all)lubricant-filled nylon 6, 6/6 Plastics |
Gray,
Blue |
 |
|
|
|
|
|
| Nylatron® Properties |
| Water Absorption (24hrs) |
(%) |
D-570 |
0.3 |
0.3 |
0.22 |
0.25 |
| Density |
(lb/in³) |
D-792 |
0.042 |
0.042 |
0.042 |
0.042 |
| (g/cm³) |
1.16 |
1.16 |
1.16 |
1.16 |
| IZOD Notched Impact |
(ft-lb/in) |
D-256 |
0.5 |
0.5 |
0.9 |
0.5 |
| Tensile Strength |
(psi) |
D-638 |
12,500 |
11,000 |
10,000 |
11,00 |
| Tensile Modulus |
(psi) |
D-638 |
480,000 |
400,000 |
500,000 |
410,000 |
| Tensile Elongation at Break |
(%) |
D-638 |
25 |
30 |
30 |
20 |
| Hardness |
(Rockwell R) |
D-785 |
M85 / R115 |
M80 / R110 |
M80 / R117 |
M80 / R110 |
| Compressive Strength |
(psi) |
D-695 |
16,000 |
14,000 |
13,000 |
14,000 |
| Compressive Modulus |
(psi) |
D-695 |
420,000 |
400,000 |
425,000 |
400,000 |
| Flexural Strength |
(psi) |
D-790 |
17,000 |
16,000 |
15,000 |
16,000 |
| Flexural Modulus |
(psi) |
D-790 |
460,000 |
500,000 |
500,000 |
475,000 |
| Thermal Conductivity |
(BTU-in/ft²-hr-°F) |
C-177 |
1.7 |
- |
- |
- |
| (x 104 cal/cm-sec-°C) |
5.86 |
- |
- |
- |
| Heat Deflection Temp at 264 psi |
(°F / °C) |
D-648 |
200 / 93 |
200 / 93 |
- |
200 / 93 |
| Coefficient of Linear Thermal Expansion |
(x 10-5 in./in./°F) |
D-696 |
4.0 |
3.5 |
5.9 |
5.0 |
| Flammability Rating |
|
UL-94 |
V-2 |
H-B |
- |
H-B |
| Melting Temperature |
(°F / °C) |
D-3418 |
500 / 260 |
420 / 216 |
420 / 216 |
420 / 216 |
| Max Operating Temp |
(°F / °C) |
- |
220 / 104 |
200 / 93 |
200 / 93 |
200 / 93 |
| DielectricStrength, 1/8" thick |
(V/mil) |
D-149 |
350 |
400 |
- |
400 |
| DielectricConstant at 106 Hz |
|
D-150 |
- |
3.7 |
- |
- |
| Dissipation Factor at 106 Hz |
|
D-150 |
- |
- |
- |
- |
| Surface Resistivity at 50% RH |
(ohm-cm) |
D-257 |
>1013 |
>1013 |
>1013 |
>1013 |
| Physical |
Mechanical |
Thermal |
Electrical |
|
|
Nylatron® GS Nylon
Nylatron® GS Nylon is a molybdenum disulphide-filled nylon (MoS2) offering improved strength and rigidity.
Nylatron® GSM
Nylatron® GSM contains finely divided particles of molybdenum disulphide (MoS2) to enhance its load-bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most commonly used grade for gears, sheaves, sprockets, and custom parts. It is gray-black in color.
- Let us be your "Just In Time Inventory."
