Distributor of Hydlar® Z (Polyamide) in Sheet, Rod, and Bar Contact Us for a Quote

Hydlar® Z (Polyamide Polymer) Plastic Shapes and Sizes:

Hydlar® Z (Polyamide) Machining (available though our plastic manufacturing division)

Polyamide Polymer MATERIAL NAME	Polyamide Polymer COLOR	FDA	USDA	NSF	3A DAIRY	AG CANADA	USP CLASS VI
Hydlar® Z Plastics	Natural

Hydlar® Properties
Property					ASTM or UL Test	Hydlar® Z
Water Absorption (24hrs)				(%)	D-570	0.8
Density				(lb/in³)	D-792	0.042
Density				(g/cm³)	D-792	1.16
IZOD Notched Impact				(ft-lb/in)	D-256	2.7
Tensile Strength				(psi)	D-638	16,000
Tensile Modulus				(psi)	D-638	1,300,000
Tensile Elongation at Break				(%)	D-638	4
Hardness				(Rockwell R)	D-785	M80 / M100
Compressive Strength				(psi)	D-695	19,300
Compressive Modulus				(psi)	D-695	-
Flexural Strength				(psi)	D-790	23,000
Flexural Modulus				(psi)	D-790	900,000
Thermal Conductivity				(BTU-in/ft²-hr-°F)	C-177	-
Thermal Conductivity				(x 10⁴ cal/cm-sec-°C)	C-177	-
Heat Deflection Temp at 264 psi				(°F / °C)	D-648	470 / 243
Coefficient of Linear Thermal Expansion				(x 10^-5 in./in./°F)	D-696	1.6
Flammability Rating					UL-94	-
Melting Temp				(°F / °C)	D-3418	- / -
Max Operating Temp				(°F / °C)	-	230 / 110
DielectricStrength, 1/8" thick				(V/mil)	D-149	-
DielectricConstant at 60 Hz					D-149	-
Dissipation Factor at 60 Hz					D-495	-
Surface Resistivity at 50% RH				(ohm-cm)	D-257	-
Physical	Mechanical	Thermal	Electrical

- Let us be your "Just In Time Inventory."