Distributor of Absylux ABS Plastic in Sheet, Rod, and Bar Contact Us for a Quote
ABS Plastic Shapes and Sizes:
- Absylux ABS Plastic Sheet
- Absylux ABS Plastic Rods
- Absylux ABS Plastic Bar
|
Typical ABS Plastic Applications:
- Easy to machine and fabricate
- Excellent dimensional stability
- Easy to paint and glue
|
Absylux ABS Plastic Machining (available though our plastic manufacturing division)
| ABS Plastic Properties |
| Classification |
|
- |
Anti-Static |
Conductive |
Conductive |
| Filler Material |
|
- |
Non-Carbon Alloy |
Carbon Fiber |
Cardon Powder |
| Water Absorption (24hrs) |
(%) |
D-570 |
1.7 |
0.32 |
0.30 |
| Density |
(lb/in³) |
D-792 |
0.037 |
0.039 |
0.041 |
| (g/cm³) |
1.03 |
1.09 |
1.13 |
| IZOD Notched Impact |
(ft-lb/in) |
D-256 |
6.0 |
1.0 |
13.0 |
| Tensile Strength |
(psi) |
D-638 |
5,000 |
10,000 |
4,000 |
| Tensile Modulus |
(psi) |
D-638 |
- |
- |
- |
| Tensile Elongation at Yield |
(%) |
D-638 |
13.0 |
3.0 |
1.0 |
| Hardness |
(Rockwell R) |
D-785 |
- |
- |
- |
| Compressive Strength |
(psi) |
D-695 |
- |
- |
- |
| Compressive Modulus |
(psi) |
D-695 |
- |
- |
- |
| Flexural Strength |
(psi) |
D-790 |
8,000 |
14,000 |
7,200 |
| Flexural Modulus |
(psi) |
D-790 |
- |
- |
- |
| Thermal Conductivity |
(BTU-in/ft²-hr-°F) |
C-177 |
- |
- |
- |
| (x 104 cal/cm-sec-°C) |
- |
- |
- |
| Heat Deflection Temp at 264 psi |
(°F / °C) |
D-648 |
160 / 71 |
210 / 99 |
170 / 77 |
| Coefficient of Linear Thermal Expansion |
(x 10-5 in./in./°F) |
D-696 |
- |
- |
- |
| Flammability Rating |
|
UL-94 |
- |
- |
- |
| Melting Temperature |
(°F / °C) |
D-3418 |
- |
- |
- |
| Max Operating Temp |
(°F / °C) |
- |
- |
- |
- |
| Surface Resistivity |
(ohms/sq) |
D-257 |
109-1011 |
10²-106 |
10²-106 |
| Volume Resistivity at 50% RH |
(ohm-cm) |
D-257 |
109-1011 |
10²-106 |
10²-106 |
| Physical |
Mechanical |
Thermal |
Electrical |
|
|
Absylux ABS is a low cost engineering plastic that is easy to machine and fabricate. It is an ideal material for structural applications when impact resistance, strength, and stiffness are required. Absylux is widely used for machining preproduction prototypes since it has excellent dimensional stability and is easy to paint and glue. This is also available in flame retardant grade
- Let us be your "Just In Time Inventory."
