Distributor of ABS Plastics in Sheet, Rod, and Bar Contact Us for a Quote

ABS Plastics Types: Polyoxy Methylene Copolymer Acetron Homopolymer Acetron (general purpose) Acetal Delrin (Homopolymer) Acetal Delrin AF Semitron ESd 225

ABS Plastics Shapes and Sizes: ABS Plastic Sheet ABS Plastic Rods ABS Plastic Tubing

Typical Applications: Medium strength Tough, hard and rigid Good chemical resistance Dimensional stability Creep resistant Electroplatable

ABS Plastics Machining (available though our plastic manufacturing division)

Agency Approval Data	COLOR	FDA	USDA	NSF	3A DAIRY	AG CANADA	USP CLASS VI
ABS Plastics	Natural

ABS Plastics Properties Abs Plastic Property ASTM or UL Test ABS Plastic Water Absorption (24hrs) (%) D-570 - Density (lb/in³) D-792 0.038 (g/cm³) 1.04 IZOD Notched Impact (ft-lb/in) D-256 7.0 Tensile Strength (psi) D-638 6,000 Tensile Modulus (psi) D-638 340,000 Tensile Elongation at Break (%) D-638 25 Hardness (Rockwell R) D-785 R105 Compressive Strength (psi) D-695 - Compressive Modulus (psi) D-695 - Flexural Strength (psi) D-790 11,000 Flexural Modulus (psi) D-790 320,000 Thermal Conductivity (BTU-in/ft²-hr-°F) C-177 - (x 104 cal/cm-sec-°C) - Heat Deflection Temp at 264 psi (°F / °C) D-648 215 / 102 Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) D-696 5.3 Flammability Rating   UL-94 H-B Melting Temperature (°F / °C) D-3418 - / - Max Operating Temp (°F / °C) - 140 / 60 DielectricStrength, 1/8" thick (V/mil) D-149 - DielectricConstant at 60 Hz   D-150 - Dissipation Factor at 60 Hz   D-150 - Volume Resistivity at 50% RH (ohm-cm) D-257 1015 Physical Mechanical Thermal Electrical

Ask A Question *Name: Company: *E-mail: Comments or questions:

ABS Plastics (Acrylonitrile-Butadiene-Styrene)

ABS Plasticis a copolymer of Acrylonitrile, Butadiene, and Styrene. ABS plastics generally possess medium strength and performance and medium cost; ABS is often used as the cost and performance dividing line between standard plastics (PVC, polyethylene, polystyrene, etc.) and engineering plastics (acrylic, nylon, acetal, etc.). ABS polymers can be given a range of properties, depending on the ratio of the monomeric constituents and the molecular level connectivity. It is tough, hard and rigid and has good chemical resistance and dimensional stability. It also is creep resistant, inexpensive, electroplatable, has moderate strength, and has a tendency to stress crack.

- Let us be your "Just In Time Inventory."

© Plastic Distribution Inc - All Rights Reserved Contact Us
Phone: 1-877-465-5645 713-465-8918 | Fax: 713-465-5658 | Address: 9426 Old Katy Road Bldg. #7 Houston, TX 77055